What you’ll need
A basic shadow puppet theatre needs only three things: a screen to catch the shadows, a light behind it, and puppets to go between them. Everything else is about making those three work well.
For a tabletop version you’ll need:
- A sturdy cardboard box (a large shoebox for one or two puppeteers, or a bigger box for more)
- Screen material: white cotton fabric, muslin, tracing paper, baking parchment or greaseproof paper
- Scissors and a craft knife (craft knife for adult use)
- Strong tape (masking or duct tape) and glue
- Black card or thin cardboard (cereal boxes work well) for puppets
- Rods: bamboo skewers with the points cut off, craft sticks, drinking straws, or thin dowels
- Brass paper fasteners (split pins) for jointed puppets
- Optional: colored cellophane or tissue paper, a hole punch, paint for decorating the front of the theatre
- A light source, ideally an LED flashlight, LED desk lamp or phone flashlight
Step 1: Choose your size
- Tabletop box theatre: good for one or two puppeteers, small puppets and home use.
- Doorway or frame theatre: a white sheet stretched across a doorway, between two chairs, or over a simple wooden or PVC-pipe frame. This suits classroom groups and lets puppeteers stand or kneel behind.
- Stage-size screen: a large stretched fabric screen for a school or community show, often lit by a projector or a theatre lantern, which allows puppeteers and even actors’ bodies to cast shadows.
Start small if you’re new to it. The principles are the same at every size.
Step 2: Build the frame
For a box theatre:
- Stand the box on its long side, with the open top facing you (this becomes the back).
- On the bottom of the box (which now faces the audience), draw a rectangle, leaving a border of about 3–5 cm (1–2 inches) on each side so the frame stays strong.
- Cut out the rectangle with a craft knife. An adult should do this step.
- Optionally, cut a slot along the top or bottom edge of the box so puppets can be slid in from above or below.
- Decorate the front border with paint, paper or a cut-out “proscenium” arch to make it look like a little theatre.
For a doorway or frame theatre, simply make sure the fabric is held taut. Wrinkles in the screen distort shadows.
Step 3: Make the screen
Tape or glue your screen material over the inside of the opening, pulling it as tight and smooth as you can.
- Tracing paper or parchment gives crisp, bright shadows and is easy to tape, but it tears.
- White cotton or muslin is more durable and great for larger screens, though slightly softer.
- White shower curtain or translucent plastic can work well for big, washable screens.
Hold a light behind your screen to test it: you want light to come through evenly, without a glaring bright spot in the middle.
Step 4: Pick and place your light
The light goes behind the puppets, on the puppeteers’ side, shining toward the screen.
- A single small light source (an LED flashlight, a bare LED bulb, a phone light) gives the sharpest shadows.
- A larger, softer light gives blurrier, gentler shadows.
- LED lights stay cool, which matters when they’re close to paper and cardboard.
Placement tips:
- Put the light a short distance behind where the puppets will be, roughly centered on the screen.
- Raise or lower it so the puppeteers’ hands and heads aren’t caught in the beam. Many people place the light slightly above and behind the puppeteers, angled down, or below the screen and angled up.
- Darken the room. The darker the audience side, the stronger the shadows.
Step 5: Make the puppets
Design
Shadow puppets work as silhouettes, so think in outlines. Profiles (side views) usually read better than front views, because a nose, hat, tail or beak tells the audience who the character is. Exaggerate key features.
Draw your character on card at a size that suits your screen. For a shoebox theatre, puppets around 8–15 cm (3–6 inches) tall are typical.
Cutting and details
Cut out the silhouette. Then add interior detail by cutting holes: an eye, a pattern on clothing, windows in a house. A hole punch is handy for neat circles. Light shines through every hole, so these details show up as bright shapes in the shadow.
Adding rods
Tape or glue a rod to the back of each puppet. There are two common approaches:
- Rod from below: the stick runs down from the puppet and the puppeteer works from beneath the screen.
- Rod from the side or behind: the stick is attached at a right angle, so it’s held from behind and doesn’t show as a long shadow.
Rods attached at a right angle to the puppet’s body, pointing back toward the puppeteer, keep the stick’s own shadow small.
Jointed puppets
For moving arms, legs, jaws or tails:
- Cut the moving part as a separate piece, with a little overlap.
- Push a brass paper fastener through both pieces at the joint, and open the prongs at the back. Keep it loose enough to swing.
- Attach a second thin rod (a skewer or a stiff wire) to the moving part so the puppeteer can control it.
Two rods take practice, so start with one moving part.
Color
Cut a window in the puppet and tape colored cellophane, tissue paper or a colored plastic folder over it. The color will glow through on the screen. Traditional Asian shadow puppets are often made from translucent, painted leather or hide, which produces colored shadows. Cellophane gives a similar effect for much less effort.
Step 6: Add scenery
Scenery can be:
- Taped directly to the screen (trees, houses, a moon), so it stays sharp and fixed
- Mounted on rods and moved in and out like the puppets
- Projected, in a larger setup, by placing colored gels or cut shapes in front of the light
Keep scenery to the edges or the bottom of the screen so puppets have room to perform.
How light and distance shape your shadows
This is the most useful thing to understand, and the most fun to play with:
- Puppet close to the screen: the shadow is smaller and sharper.
- Puppet close to the light: the shadow is bigger and blurrier.
You can use this for effects: a giant looming toward the audience, a ghost fading in and out, a character walking “into the distance” by moving back toward the screen. Experiment before you rehearse, and mark comfortable distances for each puppeteer.
Performing: tips for puppeteers
- Keep puppets flat against or parallel to the screen for crisp shadows. Tilting them distorts the shape.
- Move with purpose. Small, clear movements read better than constant wiggling. Bounce slightly when a character speaks so the audience knows who’s talking.
- Plan entrances and exits. Decide which side each character enters from, and stick to it.
- Lay out your puppets in order on a table behind the screen.
- Use a narrator. One person reading the story while others operate the puppets keeps things manageable, a little like readers theater.
- Add sound. Music, simple percussion and sound effects add atmosphere quickly.
- Rehearse with the lights off, because what looks fine in daylight may not work in silhouette.
Choosing a story
Short, clear stories with a few distinctive characters work best: fables, fairy tales, myths, or a short original story written by the group. Tales with a journey, a transformation or a monster suit shadow theatre especially well, because size changes and silhouettes are its strengths.
Safety notes
- Use LED lights. Older halogen and incandescent bulbs get very hot and can scorch or ignite paper and fabric. Keep any light source a safe distance from screens and puppets, and don’t leave lights on unattended.
- Adults handle craft knives. Children can use child-safe scissors for puppets.
- Blunt skewer points before giving them to children.
- Secure cables and lamps so they can’t be knocked over in the dark.
- Never shine bright lights directly into anyone’s eyes.
Shadow theatre traditions around the world
Shadow theatre has a long history in many cultures, and looking at traditional puppets is a great source of design ideas.
- Wayang kulit (Indonesia, especially Java and Bali): intricately carved and painted leather puppets operated by a single master puppeteer, the dalang, who also narrates and voices the characters, traditionally accompanied by gamelan music.
- Chinese shadow play (piyingxi): translucent, colored puppets traditionally made of animal hide, with many joints, performed with music and singing. If Chinese performance traditions interest you, our guide to Peking opera costumes and props explores another rich, symbolic stage form.
- Karagöz (Turkey): comic shadow plays built around two contrasting characters, Karagöz and Hacivat.
Wayang, Chinese shadow puppetry and Karagöz have each been recognized by UNESCO as part of the world’s intangible cultural heritage.
Shadow theatre is one of many theatrical styles you can explore with very few resources. For more, see our overview of theatrical styles.