Costume Design

What Is a Costume Plot in Theatre? How to Build One (with a Mamma Mia Example)

What a theatre costume plot is, what goes in one, how to build it step by step, and a worked example costume plot for the musical Mamma Mia!

On this page
  1. What is a costume plot?
  2. Why costume plots matter
  3. What goes in a costume plot
  4. Two common layouts
  5. How to build a costume plot step by step
  6. Related documents
  7. Example: a costume plot for Mamma Mia!
  8. Templates and published plots
  9. Tips

What is a costume plot?

A costume plot is a chart that shows which characters wear which costumes in each scene of a show. It’s the costume department’s master map of the production. At a glance it tells you who’s on stage, what they’re wearing, and where the costume changes fall, including the tight ones.

The costume designer usually creates it early, from the script, and keeps updating it through rehearsals. Some people call it a costume chart or scene breakdown. For a short definition, see what is the definition of a costume plot.

Why costume plots matter

  • Nothing goes missing. With a big cast, it’s easy to forget a hat or a second pair of shoes. The plot makes every piece visible.
  • Changes are planned, not discovered. You can see where an actor goes straight from one scene to the next in a different outfit, and plan the quick change well before tech.
  • The whole team works from one document. Director, stage manager, costume shop, wardrobe crew and actors can all check the same plot.
  • It drives the budget. Counting costumes per actor tells you how much needs to be built, bought, pulled or rented.

What goes in a costume plot

Most plots include some or all of these:

  • Act and scene (or song, for musicals)
  • Character name and actor name
  • A short description of the look (for example, “Act 1 day dress: blue cotton, apron, boots”)
  • Individual pieces: top, bottom, shoes, undergarments, accessories, wig or hair
  • Change notes: “quick change, 45 seconds, stage left”
  • Sourcing status: build, buy, pull, rent or borrow
  • Progress status: pulled, fitted, altered, finished
  • Colour notes, so you can see the palette across a scene
  • Special needs: blood, breakaways, water, fights, flying, mic placement

You don’t need every column on day one. Start with scene, character and look, then add detail as decisions are made.

Two common layouts

The grid. Characters run down the left side, scenes run across the top. Each cell shows the costume (often a number or short code, like “Look 3”) or is left blank if the character isn’t on stage. A grid makes changes obvious: wherever a code changes between neighbouring cells, there’s a costume change.

The list. One row per character per look, with columns for scenes, pieces and notes. Lists are easier to sort and filter in a spreadsheet and hold more detail per costume.

Many designers keep both: a grid for the overview and a list for the detail.

How to build a costume plot step by step

  1. Get a scene breakdown. List every scene in order, plus intermission. For musicals, list songs within scenes, because changes often happen around numbers.
  2. List every character. Include ensemble roles, even unnamed ones (“Wedding Guest 3”).
  3. Mark who appears where. Use the script, and check with stage management, because directors often add ensemble members to scenes.
  4. Note the given circumstances for each scene. Time of day, season, location, occasion, how much time has passed. These tell you when a costume change makes story sense. Our guide on reading a script as a costume designer covers this.
  5. Assign looks. Decide where each character changes and give each look a number.
  6. Find the tight spots. Wherever a character exits and re-enters soon in a different look, flag it with the approximate time available. Recheck once the show is running in rehearsal.
  7. Account for doubling. If one actor plays two roles, plot by actor as well as by character.
  8. Break each look into pieces. This becomes your shopping and build list.
  9. Add sourcing and status columns. Update them as items are pulled, bought, built and fitted.
  10. Share it and version it. Date each version and tell the team when it changes.

The costume plot often spawns other paperwork. The names vary between theatres, but these are common:

  • Piece list: every individual item for every actor, used for shopping, building and check-in.
  • Running plot or wardrobe plot: for the crew during performances. It shows where each costume is preset, who helps with each change, and what gets laundered after each show.
  • Quick-change plot: a detailed, timed breakdown of each fast change: who, where, in what order, which fastenings.
  • Costume bible: a full record of the finished design (renderings, photos, fabrics, suppliers, alterations). It’s used for archiving, remounts and replacing worn pieces.

Example: a costume plot for Mamma Mia!

Mamma Mia! is a popular choice for schools and community theatres, and it’s a good example because its costume moments are easy to see. The show is set on a Greek island in the days before a wedding, so most looks are summery and contemporary, with two big exceptions: the 1970s-style performance costumes and the wedding.

A note before you use this: the example below is illustrative. It’s meant to show how a plot is laid out, not to replace your licensed script. Scene numbering and staging vary between script versions and productions, so build your own plot from the script you’ve licensed.

The main costume moments

  • Arrivals. Tanya, Rosie and the three possible fathers (Sam, Harry and Bill) arrive in travel clothes that quickly establish who they are. Harry might be in smarter city clothes, for example, and Bill in rugged outdoor wear.
  • Island life. Donna’s working clothes (dungarees or overalls are a common choice) set her up as a hands-on taverna owner. Sophie and her friends wear bright, casual summer clothes.
  • Hen party and stag party. Party outfits for Sophie and friends, and for Sky and his friends.
  • “Super Trouper.” Donna, Tanya and Rosie perform as their old girl group, Donna and the Dynamos, in flamboyant 1970s-style stage costumes.
  • Beach number for the boys. “Lay All Your Love On Me” is often staged with Sky and the boys in wetsuits and flippers, a comic moment that needs shoes-off timing in the plot.
  • Act 2 nightmare. The opening of Act 2 (“Under Attack”) is a dream sequence, often staged with stylised or surreal ensemble looks.
  • The wedding. Sophie’s wedding dress, wedding-guest outfits for everyone else, and a final look for Donna.
  • Finale. Productions commonly end with the full company in glittery 1970s-style performance outfits for the curtain-call medley. That means a lot of costumes for one short sequence, and the change into them has to be planned.

Sample plot (principals)

Character Act 1: arrivals and island day Act 1: hen/stag party Act 1: “Super Trouper” Act 2: wedding day Finale
Donna Look 1: work overalls, T-shirt, sandals Look 1 or 2: evening top and trousers Look 3: Dynamos 1970s costume, platform boots Look 4: wedding outfit Look 5: finale costume
Sophie Look 1: summer dress, sandals Look 2: hen party dress – Look 3: wedding dress, veil, shoes Look 4: finale costume
Tanya Look 1: chic travel outfit, sunglasses Look 2: party outfit Look 3: Dynamos costume Look 4: wedding guest Look 5: finale costume
Rosie Look 1: practical travel outfit Look 2: party outfit Look 3: Dynamos costume Look 4: wedding guest Look 5: finale costume
Sky Look 1: casual summer Look 2: stag party look / wetsuit and flippers – Look 3: wedding suit Look 4: finale costume
Sam Look 1: travel clothes Look 2: stag party – Look 3: wedding suit Look 4: finale costume
Harry Look 1: smart travel suit Look 2: stag party – Look 3: wedding suit Look 4: finale costume
Bill Look 1: rugged travel clothes Look 2: stag party – Look 3: wedding outfit Look 4: finale costume

In a real plot you’d split these columns into individual scenes and songs, and add each actor’s name and a pieces column.

Ensemble notes and quick-change hot spots

  • Ensemble tracks. Ensemble members may play islanders, party guests, the boys in flippers, nightmare figures and wedding guests. Plot each ensemble track by actor, not just by character.
  • The Dynamos change. Getting three principals into full 1970s costumes, often with boots, needs a planned change location and dressers.
  • Flippers and wetsuits. Footwear changes take time. Note whether flippers go on in the wings and where they’re struck.
  • Into the finale. If the whole company changes into finale costumes, this is often the biggest single change in the show. Preset everything, label it by actor, and rehearse it.
  • Wedding dress. Make sure the dress is protected (a garment bag or cover) until it’s needed, and that the hem and train are tested on any stairs in the set.

Templates and published plots

You can build a plot in any spreadsheet program, which makes it easy to share and filter. For well-known published shows, some costume rental houses and theatrical suppliers publish costume plots or show breakdowns as part of their rental listings. These can be a useful starting point, but check them against your own script and staging.

Tips

  • Plot by actor, not just by character, whenever there’s doubling or a large ensemble.
  • Colour-code changes. Highlight any change shorter than a set threshold (say, under two minutes) so it stands out.
  • Walk the show with stage management once it’s blocked. Exits and entrances often move during rehearsals.
  • Keep it current. A plot that’s two weeks out of date is worse than useless, because people trust it.
  • Use it at strike. The same plot becomes your check-in list when costumes come back for storage and cataloguing.

The complete guide to costume design

Costume Design in Theatre: What Costumes Are and Why They Matter
Read the guide

Keep exploring

Guides from other topics

All topics →