Costume Design

How to Take Actor Measurements for Theatre Costumes

A step-by-step guide to measuring actors for theatre costumes: the core measurements, how to take each one accurately, and how to run a respectful session.

On this page
  1. What you need
  2. Before you start: setting up a respectful measuring session
  3. The core measurements
  4. Tips for accurate measurements
  5. Measuring children and teens
  6. Which measurements matter most for pulling vs. building
  7. Recording and storing measurements
  8. Common mistakes

What you need

  • A flexible fabric or fiberglass tape measure. Avoid metal tape measures.
  • A measurement sheet for each actor, printed or digital.
  • A length of narrow elastic or ribbon to tie around the natural waist as a reference point.
  • A pen or pencil, and a clipboard.
  • A private or semi-private space, ideally with a mirror and a chair.
  • Optional: a second person to write down measurements while you measure.

Ask actors to wear light, close-fitting clothing, such as a T-shirt and leggings or dance clothes, and to bring the shoes they’ll most likely wear in the show. Thick sweaters, jeans and padded bras or binders can throw measurements off. Note any shapewear or binders actors plan to wear in the show and measure over them if so.

Before you start: setting up a respectful measuring session

Being measured can make people feel self-conscious. A calm, professional session gets you more accurate numbers and earns trust for later fittings.

  • Explain the process before you begin, and tell the actor what you’re measuring as you go (“Now I’m going to measure across your shoulders”).
  • Ask before touching, and keep contact to the minimum needed to place the tape.
  • Let actors hold the tape at sensitive points, such as the top of the inseam or the fullest part of the bust.
  • Use neutral language. Read numbers to your note-taker quietly, or write them down yourself. Don’t comment on bodies, sizes or weight.
  • Keep sheets private. Measurement sheets contain personal information. Store them where only the costume team can see them.
  • For minors, follow your school’s or organization’s safeguarding policy. A common practice is to have two adults present, or to measure in an open room with others nearby, and never to measure a child alone behind a closed door.

Ask the actor about anything relevant to costuming: allergies (latex, wool, some dyes or metals), skin sensitivities, medical devices, piercings or tattoos they may want covered, and anything they’re uncomfortable wearing.

The core measurements

Costume shops use slightly different lists, but the measurements below cover most needs. Have the actor stand naturally, feet together, weight even, arms relaxed at their sides.

Head and neck

  • Head circumference: around the head just above the eyebrows and ears, across the fullest part of the back of the head. Used for hats, wigs and headpieces.
  • Neck: around the base of the neck where a shirt collar would sit. Leave room for one finger under the tape.

Upper body

  • Chest or bust: around the fullest part of the chest, keeping the tape level across the back.
  • Underbust or ribcage: directly under the bust, where a bra band sits.
  • Natural waist: the narrowest part of the torso, usually just above the belly button. Ask the actor to bend sideways; the crease that forms marks the natural waist. Tie a piece of elastic here and leave it on as a reference for later measurements.
  • High hip: a few inches below the waist, around the top of the hip bones.
  • Full hip or seat: around the fullest part of the hips and seat, keeping the tape level.
  • Shoulder width: across the back from the point of one shoulder to the other.
  • Across back: across the back between the creases where the arms meet the body, about halfway between the shoulders and the underarms.
  • Across chest: the same measurement across the front.

Arms

  • Sleeve length: from the shoulder point, over a slightly bent elbow, to the wrist bone. Some shops also measure from the nape of the neck over the shoulder to the wrist.
  • Bicep: around the fullest part of the upper arm.
  • Wrist: around the wrist bone.

Torso lengths

  • Nape to waist (center back): from the prominent bone at the base of the neck down to the waist elastic.
  • Front neck to waist: from the hollow at the base of the throat to the waist elastic.
  • Shoulder to waist: from the shoulder, over the fullest part of the chest, down to the waist.
  • Girth: from the top of one shoulder, down the front, through the legs and up the back to the same shoulder. Important for leotards, unitards, bodysuits and one-piece garments.

Lower body

  • Waist to knee and waist to floor: measured down the side, with the actor in the shoes they’ll likely wear, or note the heel height.
  • Inseam: from the crotch to the ankle bone or floor, along the inside of the leg. Letting the actor hold the top of the tape is standard.
  • Outseam: from the waist down the outside of the leg to the ankle or floor.
  • Thigh, knee and calf: around the fullest part of each.
  • Ankle: around the ankle bone.

Sizes and other details

  • Height.
  • Shoe size, and width if known.
  • Usual clothing sizes (shirt, trousers, dress, suit jacket), as a sanity check and for shopping.
  • Hat size if known.
  • Glove size if relevant.

Tips for accurate measurements

  • Keep the tape snug but not tight. It should lie flat against the body without compressing it.
  • Keep horizontal measurements level. Check in a mirror that the tape isn’t dipping at the back.
  • Measure from the same reference points every time. The waist elastic helps with this.
  • Don’t let actors hold their breath or pull in their stomachs. Ask them to breathe normally.
  • Write down exactly what you measured. Note anything unusual, such as “measured over binder” or “measured in 2-inch heels”.
  • Double-check key numbers like chest, waist and hip, especially if they look surprising.

Measuring children and teens

Young actors grow quickly, so:

  • Measure as close to fittings as practical, and remeasure if rehearsals run more than a couple of months.
  • Leave growth room in built costumes where you can: generous seam allowances, deep hems and adjustable fastenings.
  • Keep sessions short and friendly, and explain each step simply.
  • Follow your organization’s safeguarding rules at all times.

Which measurements matter most for pulling vs. building

If you’re pulling from stock or buying, the most useful numbers are chest or bust, waist, hips, inseam, sleeve length, neck, shoe size and height. With these you can check garments against the actor without them present.

If you’re building from scratch, the cutter or draper will want the full list, including the torso lengths, across back and chest, girth and limb measurements, because these shape the pattern.

Recording and storing measurements

A good measurement sheet has:

  • The actor’s name, character and contact details.
  • The date measured.
  • Every measurement in the same order each time, with units clearly marked.
  • Notes on allergies, sensitivities and preferences.

Keep sheets together in a binder or a shared digital folder restricted to the costume team. They’ll be used repeatedly: for pulling stock, shopping, alterations and fittings. Many community theaters keep measurements on file between shows, with the actor’s permission, and update them each season.

Common mistakes

  • Measuring over thick or loose clothing.
  • Pulling the tape too tight, or letting it sag.
  • Guessing the natural waist instead of finding it.
  • Forgetting to account for shoe heel height in length measurements.
  • Measuring once at auditions and never updating, especially for children.
  • Leaving measurement sheets where other cast members can see them.

Accurate measurements are the foundation of every costume that fits well. They save time, fabric and frustration later in the process. For how measurements feed into the rest of the costume process, see our guide to the responsibilities of a theater costume designer.

The complete guide to costume design

Costume Design in Theatre: What Costumes Are and Why They Matter
Read the guide

Keep exploring

Guides from other topics

All topics →