Costume Design

What are the three types of theater?

The three main types of theater stage are proscenium, thrust and arena (in-the-round). Here's how each one works and what it means for costumes and staging.

On this page
  1. The short answer: proscenium, thrust and arena
  2. Proscenium stage
  3. Thrust stage
  4. Arena or theatre-in-the-round
  5. Other stage types you will hear about
  6. How the stage type changes costume design
  7. If you meant types of plays rather than stages
  8. Which stage will a school or community show use?

The short answer: proscenium, thrust and arena

When people ask about the three types of theater, they usually mean the three classic stage configurations, defined by where the audience sits in relation to the acting area:

  1. Proscenium stage: the audience sits on one side, facing a stage framed by an arch.
  2. Thrust stage: the stage pushes out into the audience, who sit on three sides.
  3. Arena stage (theatre-in-the-round): the audience surrounds the stage on all sides.

Most other layouts are variations on these three or hybrids of them. Each one changes how a show is directed, lit and designed, costumes included.

Proscenium stage

A proscenium stage is the layout most people picture when they think of “a theater”. An architectural frame, the proscenium arch, separates the stage from the auditorium, though it isn’t always arch-shaped. Everyone in the audience faces the same direction and looks through the frame as if through a window. That’s where the idea of the “fourth wall” comes from.

Proscenium theaters often have deep stages, wings at the sides for hiding scenery and performers, and sometimes a fly tower above for raising and lowering scenery. Some also have an apron, a strip of stage that extends past the arch toward the audience, and an orchestra pit for live musicians.

Most large commercial theaters and many school auditoriums are proscenium or close to it.

Thrust stage

A thrust stage projects out into the auditorium, so the audience sits on three sides and the back wall serves as a backdrop for scenery. The acting area might be square, rectangular, semicircular or many-sided.

Thrust staging puts the audience closer to the performers and tends to feel more intimate than a proscenium. Shakespeare’s Globe in London is a well-known example of the form.

Arena or theatre-in-the-round

In an arena or in-the-round theater, the acting area sits in the middle and the audience surrounds it. Despite the name, the seating is often square or many-sided rather than truly circular. Actors usually enter and exit through aisles or tunnels between the seating blocks, sometimes called vomitories.

Scenery in the round has to stay low or sparse so it doesn’t block anyone’s view. Directors also keep the actors moving so that no section of the audience is stuck looking at someone’s back for too long.

Other stage types you will hear about

The three-way split is a starting point, and theater people use several other terms:

  • Black box or studio theater: a flexible, usually black-painted room where seating can be rearranged into different layouts for each production.
  • End-on or platform stage: like a proscenium but without the arch. Often a raised platform at one end of a hall, which describes many school gyms and community halls.
  • Traverse (alley) stage: the audience sits on two opposite sides of a long, narrow acting area.
  • Promenade theater: the audience moves around the space, following the action.
  • Open air theater: performed outdoors, sometimes with partial cover over the stage.
  • Site-specific theater: staged in a non-theater location such as a warehouse, house or pub, often chosen because of the place itself.

How the stage type changes costume design

Stage configuration is one of the first things a costume designer needs to know, because it affects what the audience can actually see.

Seen from every side

On a proscenium stage, much of the audience sees mostly the front of a costume. On a thrust stage, and especially in the round, the back and sides matter just as much. Fastenings, the back of a bodice, a jacket’s rear vent and the inside of a cape all become visible, so they need to be finished properly or hidden on purpose. A costume that relies on a striking front with an unfinished back may work in a proscenium house but look half-done in the round.

Distance and detail

Proscenium theaters, especially large ones, put many audience members a long way from the stage. Designers there often exaggerate silhouette, color contrast and trim so the costume still reads from the back row. In a small black box or thrust space, the front row may be a few feet away, so fine details, fabric quality and fit are noticed. Cheap shortcuts are harder to hide.

Entrances, exits and quick changes

Wings and backstage areas vary hugely by stage type. A proscenium stage usually has wings where dressers can set up a quick-change booth. In an arena or traverse layout, actors may have to exit down an aisle and change in a corridor or tunnel with very little room. The costume team needs to know these routes early, especially for shows with fast changes. Our article on costume quick changes goes into how these moments are planned.

If you meant types of plays rather than stages

The question sometimes comes up in a drama class about genres instead. The classic answer there starts with comedy and tragedy, the two forms inherited from ancient Greek theater. Textbooks differ on the third. Some list drama (serious plays that aren’t strictly tragic), others tragicomedy, others melodrama or farce. If you’re answering for a class, check which framework your teacher or textbook uses.

Others mean the sectors of theater, such as professional or commercial, nonprofit or regional, and amateur or community theater. There isn’t one official list for this either.

Which stage will a school or community show use?

Most school and community productions perform on whatever stage the building has, and that’s usually a proscenium or end-on stage in an auditorium, cafeteria or hall. Some community groups use black box spaces or perform in the round for intimate plays.

If you’re designing costumes for a small group, find out the layout before you shop or sew. It tells you whether backs and fastenings need finishing, how much detail will be visible and where your actors will change. For an overview of how costumes fit into the wider production, see our guide to costume design in theatre.

The complete guide to costume design

Costume Design in Theatre: What Costumes Are and Why They Matter
Read the guide

Keep exploring

Guides from other topics

All topics →